Installation

Phrozen Sonic Mega 8K Large VAT install

Large VAT install

Phrozen Sonic Mega 8K Large VAT install

Large 3D format printers has a wide displacement and more metal than a medium size vat. Installing the ThermalVATBAND inside of the inner frame regulates heat more rapidly. Less delay in the heat-recovery stage.Ā  Using an adjustable 12V/3A adapter power source you can dial back the heat or in cold weather, leave it on max position to compensate the cold temperature as the thermostat will regulate the ideal temperature at 21C/70F-32C/90F.
Make sure your build plate is at home position completely submerged into a full tank of resin.
*Common question: why does the ThermalVATBAND only go to half way and does it really heat up my resin?
– We have tested so many variations and the most practical and efficient method is to go half way around the vat, allowing the ThermalVATBAND to heat at the right temperature safely at the minimum cost of .85 per 24 hours. The process is simple, as the 3D printer prints, the build plate will go up and down on the Z axis causing the warm resin to mix evenly.Ā  There is no cold spots only 2 degrees difference when the build plate is at home not moving.

Installing your ThermalVATBAND

  • Use the scuff pad to clean the inner vat with IPA. Scrub one side and flip the pad and scuff again, till all the flakes of dried resin is removed.
  • Inner vat installation is recommended without FEP for easier access and a cleaner installĀ 
  • Apply the ThermalVATBAND on the inner side of the vat making sure your plug is accessible
  • Apply the top sticker mylar to seal the outer edge or use electric tape
  • Fill your resin to its MAX level
  • Allow your build plate to submerge into the vat at home positionĀ 
  • Let the ThermalVATBAND prime and reach its peak temperature
  • Seal the outer edge of your case with insulating foam tape to prevent cold air to blow into the vat
  • Apply the sticker thermometer to a visible area

1 Comment

  1. Tizi
    July 8, 2022 at 8:29 am

    Hi to every , as I am really keen of reading this weblog’s post to
    be updated regularly.

Leave a Comment

Your email address will not be published.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Add to cart
Click outside to hide the compare bar
Compare
Compare ×
Let's Compare! Continue shopping
0
0